DTS-500N – Máy đo lực căng – Hans-Schmidt

Hổ trợ trực tuyến

dts-500n-–-may-do-luc-cang-–-hans-schmidt.png

DTS-500N – Máy đo lực căng – Hans-Schmidt

Xuất sứ: Germany

Nhà cung cấp: Song Thành Công

Hãng sản xuất: Hans-schmidt_Handel

Ứng dụng sản phẩm: Các ngành sản xuất, Hàng hải - dầu khí - hóa chất

Liên hệ tư vấn

Mr. Văn Tú

vantu@songthanhcong.com

0359643939

live:.cid.f90810a71fca3c79

Thông tin sản phẩm
Thông số kỹ thuật

DTS-500N – Máy đo lực căng – Hans-Schmidt – Song Thành Công

Tên: DTS-500N – Máy đo lực căng

Model: DTS-500N

Nhà sản xuất: Hans-Schmidt

Đại lý phân phối: Song Thành Công

[caption id="attachment_6422" align="alignnone" width="400"] DTS-500N – Máy đo lực căng – Hans-Schmidt[/caption]

Thông tin sản phẩm:

Xem thêm thông tin sản phẩm tại đây

Tension meter DTS with large, backlight LCD-display

3 different display modes:
– numeric
– numeric with bargraph
– numeric with graph (Time-Tension)
The display rotates in 90° steps for better reading
New, unique, force reduced material catching system
Thickness compensation: to reach highest accuracy the diameter of the material to be measured can be set with a wheel and will be displayed in the screen (not available for all models)

Automatic „Zero-Setting“ in each measuring position using a special sensor technique

4 Material memory locations for customer made calibrations
Calibration adjustment for fine tuning of the calibration if material differs from the used calibration material
Programmable MIN- and MAX alarms: indication in the display, if reading is out of limits
High speed data sampling (internal 8 kHz) and recording of MIN-, MAX-, last reading, PEAKS, average and standard deviation
Selectable units of measurement: cN, daN, g, kg, N, lb
Menu set-up in English or German language
Flexible menu set-up to meet operators demand
Some functions can be password protected

Các model sản phẩm khác:

FESTO	Model: DSBC-40-160-PPSA-N3 (include DSBC/G-40-753089 + DSBC-40-1113784) Cylinder
FESTO	Model: DSBC-63-150-PPVA-P2 Cylinder
FESTO	Model: DSBC-80-100-C-PPVA-N3 Cylinder
FESTO	Model: KP-25-5000 Clamping cartridges
Hans-schmidt	Model: DTX-200 Tension Meters
Henan Mordern/HMIC	Brake lining of ST3SH Note : conf bản vẽ khi order
Hengesbach	Pressure transmitter PZM101_0,3bar_MT1 suitable for relative or absolute pressure measurements. programmable by external operating module OPUSM, flush mounted sensor membrane, stainless steel, laser welded field housing material AISI 304 (Wkst. 1.4301), hygienic design power supply 13...36V DC output signal 4-20 mA, 2-wire, turndown 10 linearity ≤ ±0,15% FS overload protection ≥ 2,5-fold sensor measuring range process connection: modular process connection system PZM, EHEDG type EL Aseptic Class 1 certified, with thrust bolt, material AISI 316L implementation - potted electronics, protection rating IP 67 & IP 69K according to EN 60529 - o-ring sealing 28x2,5, material EPDM (FDA compliant) ordering information sensor measuring range / adjusted measuring range: 1bar rel / 0,3bar rel electrical connection: round plug M12x1 temperature type: T1 Standard according to data sheet PN-PZM100-101... current revision
Honeywell	Model : GCP31ANM-1A Circuit Protector
Honeywell	Model : GCP31ANM-2A Circuit Protector
Honeywell	Model : GCP31ANM-3A Circuit Protector
Honeywell	Model : GCP31ANM-5A Circuit Protector
Honeywell	Model : GCP-33ANM-10A Circuit Protector (GCP10AMP-3POLE, 220V-10A) Note : recheck code khi order