Liên hệ tư vấn

0359643939

2-31-040

SON4 Alarm Sounder & Xenon Beacon


Sounder:
Maximum output:	104dB(A) @ 1 metre [95dB(A) @ 10ft/3m]
Nominal output:	100dB(A) @ 1m +/- 3dB - Tone 2 [91dB(A) @ 10ft/3m]
No. of tones:	32 (UKOOA / PFEER compliant)
No. of stages:	3
Volume control:	3 levels via on board switch
Effective range:	32m/105ft @ 1KHz
Stage switching:	Reverse polarity stage switching on DC units.

Beacon:
Energy:	0.5 Joules
Flash rate:	1 Hz (60fpm)
Peak Candela:	50,000 cd - calculated from energy (J)
Effective Intensity cd:	25 cd - calculated from energy (J)
Peak Candela:	5,038 cd* - measured ref. to I.E.S.
Effective Intensity cd:	11 cd* - measured ref. to I.E.S.
Lens colours:	Amber, Blue & Red
General:
Voltages DC:	24V dc (18-30V dc)
	Reverse polarity diode protection on DC units.
Voltages AC:	24V ac; 115V ac; 230V ac
Ingress protection:	IP66
Housing material:	High impact UL94 V0 & 5VA FR ABS
Colour:	Red (RAL3000), grey (RAL7038) & white.
Lens material:	PC
Cable entries:	4 x M20 clearance gland knockouts in side & back
Terminals:	0.5 to 1.5mm² cables.
Operating temp:	-25 to +55°C [-13° to +131°F]
Storage temp:	-40 to +70°C [-40° to +158°F]
Relative humidity:	90% at 20°C [68°F]
Weight:	DC: 0.30kg/0.66Ibs AC:0.40kg/0.88Ibs

*SPL data +/-3dB(A). Measured at optimum voltage.
*Candela measurements representative of performance with amber lens at optimum voltage.

Stage 1	WAV file	Frequency Description.	Stg 2	Stg 3
T 1	↓	340 Hz Continuous	T 2	T 5
T 2	↓	800/1000Hz @ 0.25 sec Alternating	T 17	T 5
T 3	↓	500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop	T 2	T 5
T 4	↓	800/1000Hz @ 1Hz Sweeping	T 6	T 5
T 5	↓	2400Hz Continuous	T 3	T 26
T 6	↓	2400/2900Hz @ 7Hz Sweeping	T 7	T 5
T 7	↓	2400/2900Hz @ 1Hz Sweeping	T 10	T 5
T 8	↓	500/1200/500Hz @ 0.3Hz Sweeping	T 2	T 5
T 9	↓	1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P.	T 15	T 2
T 10	↓	2400/2900Hz @ 2Hz Alternating	T 7	T 5
T 11	↓	1000Hz @ 1Hz Intermittent	T 2	T 5
T 12	↓	800/1000Hz @ 0.875Hz Alternating	T 4	T 5
T 13	↓	2400Hz @ 1Hz Intermittent	T 15	T 5
T 14	↓	800Hz 0.25sec on, 1 sec off Intermittent	T 4	T 5
T 15	↓	800Hz Continuous	T 2	T 5
T 16	↓	660Hz 150mS on, 150mS off Intermittent	T 18	T 5
T 17	↓	544Hz (100mS)/440Hz (400mS) - NF S 32-001	T 2	T 27
T 18	↓	660Hz 1.8sec on, 1.8sec off Intermittent	T 2	T 5
T 19	↓	1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s -NFC48-265	T 2	T 5
T 20	↓	660Hz Continuous	T 2	T 5
T 21	↓	554Hz/440Hz @ 1Hz Alternating	T 2	T 5
T 22	↓	544Hz @ 0.875 sec. Intermittent	T 2	T 5
T 23	↓	800Hz @ 2Hz Intermittent	T 6	T 5
T 24	↓	800/1000Hz @ 50Hz Sweeping	T 29	T 5
T 25	↓	2400/2900Hz @ 50Hz Sweeping	T 29	T 5
T 26	↓	Bell	T 2	T 15
T 27	↓	554Hz Continuous	T 26	T 5
T 28	↓	440Hz Continuous	T 2	T 5
T 29	↓	800/1000Hz @ 7Hz Sweeping	T 7	T 5
T 30	↓	420Hz @ 0.625 sec Australian Alert	T 32	T 26
T 31	↓	660/1200Hz @ 1Hz Sweeping	T 26	T 5
T 32	↓	500-1200Hz 3.75sec /0.25sec. Australian Evac.	T 30	T 26
Country specific or custom tone configurations and alarm frequencies are available upon request.